Printed Circuit Board Series 1800
Series 1800
Four-Flute End Mills
Four flute end mill designed for routing or milling printed circuit boards.
Diameter Range
0.0625" - 0.1250"
STANDARD Flute Length (Inch)
| Part Number |
End Mill Size |
Dimensions (in) | Helix Angle |
|
| Cutting Dia. (ØD) |
Flute Length (L2) |
|||
| 1800.0625.200 | 1/16" | 0.0625 | 0.2000 | 30° |
| 1800.0938.438 | 3/32" | 0.0938 | 0.4380 | 30° |
| 1800.1250.500 | 1/8" | 0.1250 | 0.5000 | 30° |
Part Numbers above include rings set at 0.800"
For Ringless Part Number, replace series "." with "-" (XXX-XXXX.XXXX)
Additional diameters and special ring colors available upon request
© KYOCERA Precision Tools | All rights reserved.