KYOCERA Precision Tools

Indexable General Catalog

View our extensive indexable product lines in one place

View Online Download PDF (157MB)

2021-2022 Indexable General Catalog!

Including indexable turning, milling, grooving & cut-off, threading and drilling solutions


Use our new digital catalog

  • Contents tree for fast navigation
  • In-page hotlinks to get you to the right products
  • Easily share with others
  • Works great on mobile devices
  • Optimized for faster page loads
  • Extensive product information
  • Technical recommendations and troubleshooting

Featured 2021-2022 Catalog Updates

OCT 2020

CCX CVD Coated Cermet for Finishing

The newly developed CVD coated cermet grade maintains long tool life and improved wear resistance. The CCX turning insert grade is great for high-speed finishing of low carbon steel, general steel, and cast iron. CCX is available in both positive and negative insert geometries.

View product page › View product brochure ›

PR1725 / PR1705 PVD Coated Carbide

Great for machining small part steel and other materials, the new PR1725 grade comes in a wide range of chipbreakers for a wide range of applications. The new PR1705 grade maintains excellent wear resistance and is used for high-precision machining of free-cutting steel.

View product page › View product brochure ›

PR015S Milling Grade for Hardened Material

Introducing Kyocera's new PR015S milling grade hardened material applications. PR015S provides long tool life and stable machining for various milling cutter product lines. The excellent thermal properties reduce notch wear using Kyocera proprietary MEGACOAT HARD coating technology.

View milling inserts › View product brochure ›

JCT-Series Jet Coolant-Through Expansion

Kyocera's line of jet coolant-through toolholders are now available in inch sizes for turning, external grooving, cut-off, and threading applications, the JCT-Series holders are capable of pressure up to 2,900 psi. Unique coolant streams from multiple directions provide superior cooling action for the insert with a controlled chip flow. Easy coolant connections are used for fast setup times.

View product page › View product brochure ›

KPK-Series High-Performance Cut-Off

With Kyocera's new insert, blade, and tool block designs, you can achieve rigid, safe, and secure cut-off operations with the KPK's powerful clamping mechanisms. The new insert clamp design is built to reduce down-time with fast insert replacements keeping your production line moving.

View product page › View product brochure ›

SIGC Small Internal Grooving Series

Introducing Kyocera's new SIGC high-precision series for small internal grooving applications. The SIGC is designed with double coolant holes to provide excellent chip control when inside the workpiece. Pair either steel or carbide shank holders with PR1725 inserts for increased wear resistance and great precision.

View product page › View product brochure ›

M-THREE (MEV) Multi-functional Milling Series

The brand new M-THREE series milling line is engineered for low cutting forces while maintaining high rigidity. The newly developed triangular inserts provide various solutions to common machining challenges with longer insert and holder life. Great for shouldering, slotting, and ramping applications.

View product page › View product brochure ›

MEAS Milling Series for Aluminum

The MEAS series is engineered with unique, grooved insert pockets for added stability when machining at high speeds. Utilize simultaneous 3-axis machining with a maximum ramping angle of up to 20 degrees. The MEAS provides you with a broad range of applications from facing, shouldering, slotting, and profiling to pocketing, ramping and plunging.

View product page › View product brochure ›

Featured 2019-2020 Catalog Updates

SEPT 2019

CA025P Expansion with Positive Inserts

Next generation CVD coated carbide grade for interrupted to continuous steel turning. The new coating features enhanced chipping and wear resistance. An all new base material ensures excellent fracture resistance. Now available on positive and negative inserts in a variety of chipbreakers.

View turning inserts › View product page ›

PDL010 DLC Coated Carbide

Achieve long tool life with a hardness close to that of diamond using Kyocera’s proprietary hydrogen-free DLC coating. The new PDL010 grade has been introduced to cover a wider range of finishing applications while the PDL025 continues to outperform competitors in general purpose aluminum applications.

View turning inserts › View product page ›

AP Chipbreaker for Aluminum Finishing

Introducing a new positive ground chipbreaker for aluminum finishing applications. The AP chipbreaker provides excellent surface finish and improved chip control. The combination of a sharp cutting edge and DLC coating prevents burr formation in both external turning and boring operations.

View turning inserts › View product brochure ›

P Chipbreaker for Boring

The new P style ground chipbreaker for boring applications maintains stable chip evacuation towards the outside of the workpiece by controlling the direction of the chips better than conventional ground chipbreakers. Combine these inserts with Kyocera’s Dynamic Bars for the best results.

View turning inserts › View product brochure ›

JCT-Series Jet Coolant-Through Holders

New line of jet coolant-through toolholders available for turning, external grooving, cut-off, and threading applications, the JCT-Series holders are capable of pressure up to 2,900 psi. Unique coolant streams from multiple directions provide superior cooling action for the insert with a controlled chip flow. Easy coolant connections are used for fast setup times.

View product page › View product brochure ›

JCT-Series for Small Parts Machining

The new JCT holders are designed with multiple coolant holes to direct coolant at precise locations to prevent defects and lengthen tool life. Capable of pressure up to 2,900 psi, the large holder lineup includes the Screw-clamp styles for turning and copying operations, the KGBF for small external grooving, and the KTKF style for small diameter cut-off applications.

View product page › View product brochure ›

DRV Magic Drill Expansion

Ideal for the automotive, aerospace and medical device industries, the DRV Magic Drills combine a CVD coated insert on the outside cutting edge and a PVD coated insert on the inside cutting edge. This allows for high-speed machining and excellent drilling precision. New sizes now available from 0.5”~1.5” and 12mm~39mm.

View in catalog › View product page ›

KPC-Series Polygon Shank Quick Change Holders

New line of quick-change polygon taper shank holders for high-rigidity and high-precision machining. The KPC-series holders feature dual contact surface connection and a rigid body construction and is available in several holder styles for turning, grooving, cut-off, and threading applications.

View in catalog › View product brochure ›
Top