Printed Circuit Board Series 2350
Series 2350
Low Fracture Updraft Drill Point Routers
Chipbreaker style updraft router designed with a cutting force reduction geometry leading to minimal routed edge fracturing and superior edge finish.
Diameter Range
0.80mm - 2.40mm
STANDARD Flute Length (Metric)
| Part Number |
Router Size |
Dimensions (mm) | End Style |
|
| Cutting Dia. (ØD) |
Flute Length (L2) |
|||
| 2350.0315.177D | 0.80mm | 0.800 | 4.50 | Drill Point |
| 2350.0394.177D | 1.00mm | 1.000 | 4.50 | Drill Point |
| 2350.0492.197D | 1.25mm | 1.250 | 5.00 | Drill Point |
| 2350.0630.256D | 1.60mm | 1.600 | 6.50 | Drill Point |
| 2350.0787.276D | 2.00mm | 2.000 | 7.00 | Drill Point |
| 2350.0945.315D | 2.40mm | 2.400 | 8.00 | Drill Point |
Part Numbers above include rings set at 0.800"
For Ringless Part Number, replace series "." with "-" (XXX-XXXX.XXXX)
Additional diameters and special ring colors available upon request
© KYOCERA Precision Tools | All rights reserved.